ON THE STABILITY OF THE FOUR-POLE POINCARE-STEKLOV FOR SOLVING TASKS OF HARDWARE IN THE LOOP MODELING OF SYSTEMS

  • М.N. Maksimov Southern Federal University
  • R.V. Sklifus Southern Federal University
  • S.М. Maksimova Don State Technical University
Keywords: Hardware in the loop simulation, stability of hardware in the loop simulation, Poincare- Steklov filter

Abstract

The article considers the stability of the Poincare–Steklov filter both from the point of view
of the theory of four-poles and from the point of view of iterative numerical methods for solving a
system of linear algebraic equations. HIL simulation involves splitting the initial system into parts, with one part being modeled numerically on a computer, and the second part is represented by a real
physical object. The parts of the system exchange data with each other through a hardware-software
interface, which can be implemented in different ways and should ensure stability, as well as convergence
of the results of HIL simulation to the results of modeling the original system. The variants of
constructing software and hardware interfaces ITM, TLM, TFA, PCD, DIM, GCS and the Poincare-
Steklov filter are described in the relevant literature sources. At the first stage, the article formulated
in a generalized form the problem of analyzing the stability of a system divided into parts using the
Poincaré-Steklov filter. The parameters of this system are found. At the second stage, the analysis of
the stability of the system divided into parts was carried out both from the point of view of the theory
of quadripoles and numerical methods for solving a system of linear algebraic equations. At the next
stage, the article presents the results of numerical modeling of the initial and partitioned system in
MATLAB. When modeling in parts, the parts of the system exchanged data with each other at each
step of the simulation only once with a delay of h. This method of numerical modeling of a system
divided into parts is as close as possible to the processes occurring during HIL modeling of systems.
A comparison of the obtained simulation results of the initial and fragmented system allowed us to
conclude that the Poincare-Steklov filter, with the correct choice of values of stabilizing parameters,
allows for stability and convergence of the results of HIL modeling of systems, and can also easily
ensure the stability of the results of PHIL modeling.

References

1. Ren W., Steurer M., Baldwin T.L. Improve the stability and the accuracy of power hardwarein-
the-loop simulation by selecting appropriate interface algorithms, IEEE Transactions on Industry
Applications, Jul/Aug 2008, Vol. 44, No. 4, pp. 1286-1294.
2. Santi E., Siegers J. Improved power hardware-in-the-loop interface algorithm using wideband
system identification, Twenty-Ninth Annual IEEE Applied Power Electronics Conference and
Exposition (APEC), 2014, pp. 1198-1204.
3. Tucker J. Power-Hardware-In-The-Loop (PHIL) Considerations and Implementation Methods for
Electrically Coupled Systems, MS Thesis, Dept. of Elect. Eng., Univ. of South Carolina, 2011.
4. Mersenski R. Evaluation of a New Power-Hardware-In-The-Loop (PHIL) Interface Algorithm for
Current Controlled Amplifiers, M.S. thesis, Dept. of Elect. Eng., Univ. of South Carolina, 2011.
5. Paran S., Edrington C.S. Improved power hardware in the loop interface methods via impedance
matching, Proc. IEEE Electric Ship Technologies Symposium, April 2013, pp. 342-346.
6. Dmitriev-Zdorov V.B, Lyashev V.A., Maksimov M.N. Realizatsiya raspredelennogo
modelirovaniya elektricheskikh tsepey v lokal'nykh vychislitel'nykh setyakh [Implementation
of distributed simulation of electrical circuits in local area networks], Tele-kommunikatsii
[Tele-communications], 2001, No. 11, pp. 15-19.
7. Dmitriev-Zdorov V., Dougle R., Lyashev V., Maksimov M., Popov V., Solodovnik E. Distributed
Simulation of the Electromechanical System in the VTB, Fifth IASTED International Conference
Power and Energy Systems (PES 2001) in Tampa, FL, November 19-22, 2001.
8. Dmitriev-Zdorov V.B., Ljashev V.A., Maksimov M.N. Modified concurrent relaxation method
and improving the stability of numerical analysis by partitioning, Int. Conf. IT-2002, Part#3.
Taganrog: TSURE, 2002, pp. 35-37.
9. Dmitriev-Zdorov V.B., Maksimov M.N. Modelirovanie po chastyam [Modeling in parts], Mater.
mezhdunarodnoy nauchnoy konferentsii «Dinamika protsessov v prirode, obshchestve i
tekhnike; informatsionnye aspekty» [Materials of the international scientific conference "Dynamics
of processes in nature, society and technology; information aspects"]. Part 2. Taganrog:
TRTU 2003, 108 p. 7 p.
10. Maksimov M.N. Raspredelennoe modelirovanie sistemy razbitoy na tri chasti [Distributed
modeling of a system divided into three parts], Mater. mezhd. nauchn. konf. «Sistemnyy
podkhod v naukakh o prirode, cheloveke i tekhnike» [Materials of the international scientific
conference "A systematic approach in the sciences of nature, man and technology"]. Part 5.
Taganrog: TRTU, 2004, pp. 32-37.
11. Popov V.P., Maksimov M.N., Merezhin N.I. Ob ustoychivosti i skhodimosti modelirovaniya po
chastyam. Rossiyskaya Akademiya nauk [On the stability and convergence of modeling in
parts. Russian Academy of Sciences], Vestnik yuzhnogo nauchnogo tsentra [Bulletin of the
Southern Scientific Center], 2005, Vol. 1, Issue 3, pp. 11-21.
12. Dmitriev–Zdorov V.B., Maksimov M.N., Popov V.P., Bastos J., Monti A., Dougal R. Generalized
Coupling Scheme for Distributed Simulations of Power Systems, Transactions of the Society
for Modeling and Simulation International, March 2006.
13. Maksimov M.N. Tekhnologiya modelirovaniya sistem po chastyam [Technology of modeling
systems in parts], Parallel'nye vychisli-tel'nye tekhnologii (PaVT’2011): Tr. mezhdunarodnoy
nauchnoy konferentsii (Moskva, 28 marta – 1 aprelya 2011 g.) [Parallel Computing Technolog
es (PAVT’2011): Proceed ngs of the Internat onal Sc ent f c Conference (Moscow, March
28 - April 1, 2011)]. Chelyabinsk: Izdatel'skiy tsentr YuUrGU, 2011, 705 p. ISBN 978-5-696-
04090-5.
14. Lyashev V. Stability of Concurrent Relaxation Algorithm, Izvestia SFedU. Engineering Science,
2010, No. 2, pp. 39-45.
15. Lyashev V. Accuracy issue in delayed feed-back decomposition systems, Izvestia SFedU. Engineering
Science, 2010, No. 1, pp. 201-204.
16. Maksimov M.N., Merezhin N.I., Fedosov V.P., Labyntsev A.V., Maksimov A.A. Ekvivalentnaya
skhema sshivayushchego chetyrekhpolyusnika [Equivalent scheme of a crosslinking fourpole],
Radiotekhnika i elektronika [Radio engineering and electronics], 2016, Vol. 61, No. 2,
pp. 162-169.
17. Mikhail Maksimov, Vladimir Llyashev, Nikolay Merezhin, Sergey Sinyutin. Poincare-Steklov
filter in hardware-in-the-loop modeling, 2017 International Siberian Conference on Control
and Communications (SIBCON) Year: 2017, pp. 1-6. DOI: 10.1109/SIBCON.2017.7998531.
18. Vlakh I., Singkhal K. Mashinnye metody analiza i proektirovaniya elektronnykh skhem [Machine
methods of analysis and design of electronic circuits]: trans. from engl. Moscow.: Radio
i svyaz', 1988, 560 p.
19. The Schur Complement and Its Applications, edited by Fuzhen Zhang, Springer Ver- lag, Series:
Numerical Methods and Algorithms, 2005, Vol. 4, 295 p.
20. Maksimov M.N., Maksimova S.M. Primenenie chetyrekhpolyusnika Puankare-Steklova dlya
postroeniya interfeysa pri polunaturnom modelirovanii sistem [Application of the four-pole
Poincare-Steklov for interface construction in semi-natural system modeling], Izvestiya YuFU.
Tekhnicheskie nauki [Izvestiya SFedU. Engineering Sciences], 2021, No. 6, pp. 43-52.
21. Maksimov M.N., Maksimova S.M. Ispol'zovanie chetyrekhpolyusnogo predstavleniya fil'tra
Puankare-Steklova dlya polunaturnom modelirovanii nelineynykh sistem [Using the four-pole
representation of the Poincare-Steklov filter for semi-natural modeling of nonlinear systems],
Izvestiya YuFU. Tekhnicheskie nauki [Izvestiya SFedU. Engineering Sciences], 2021, No. 6,
pp. 34-42.
Published
2023-02-27
Section
SECTION I. MODELING OF PROCESSES AND SYSTEMS